Polyglass U.S.A., Inc., a leading manufacturer of roofing and waterproofing systems, put together a series of Tech Tip videos. These five Polyglass Tech-Tip videos demonstrate how to properly install or repair details on low-slope roofs. In each video a Polyglass technical services expert walks through step-by-step demonstrations on Polyglass recommended installation and repair tips on Polyglass ADESO® self-adhered base and cap sheets, flashing compounds, and adhesives.

Tech Tip: Proper Scupper Flashing Detail

In this step-by-step video, Polyglass technical expert Tim Leithead walks you through how to properly flash a scupper using Polyglass Elastoflex SA V and Polyflex SA P self-adhered membranes.

Proper Scupper Flashing Detail Video

Tech Tip: How To Properly Reinforce Scupper

In this step-by-step video, Polyglass technical expert Tim Leithead demonstrates how to properly repair and reinforce a scupper utilizing PolyFlash 1C one-part flashing compound and reinforcing fabric.

Reinforce Scupper Video

Tech Tip: Demonstrating Puncture Repair on Self-Adhered Cap Sheet

In this step-by-step video, Polyglass technical expert Henry Rives goes over how to properly patch a hole or damage in Polyflex SA P self-adhered granulated cap sheet using two recommended methods. The first method uses adhesives, either PG 500 or PolyPlus 50. The second method uses heat to activate the self-adhered compound to adhere to the damaged cap sheet.

Puncture Repair on SA Video

Tech Tip: Installing Pipe Flashing Detail

In this step-by-step video, Polyglass technical expert Henry Rives the focus of this video is how to properly install a field wrap on a penetration using a Polyflex SA P self-adhered granulated cap sheet. The over granular condition created while installing or repairing this detail needs to be bonded, it is recommended to use PG500 or PolyPlus 50 or a hot air welder.

Pipe Flashing Detail Video

Tech Tip: Properly Staggering Plies

In this step-by-step video, Polyglass technical expert Tim Leithead walks you through the importance of properly staggering base sheets in a multi ply system. This demonstration focuses on a 3-ply system. All of Polyglass’ premium base sheets have pre-printed lay lines for ease of installation.

Staggering Plies Video

Check out the Polyglass YouTube Channel POLYflix for more Tech Tips, product videos, project profiles and more!

For more information about the premium products and services offered by Polyglass, call 800.222.9782 or visit polyglass.us.