Global coatings supplier Hempel, have just announced the launch of HEMPADUR AvantGuard®, a portfolio of three new anti-corrosive zinc primers. Based on unique, patented AvantGuard® technology, HEMPADUR AvantGuard® coatings provide better anti-corrosion protection than zinc epoxies without AvantGuard®.

Protection with Zinc Coatings

Zinc coatings are used to protect industrial structures and equipment in C4 and C5 corrosive conditions, where saltwater and high humidity corrode unprotected steel. Based on new, patented AvantGuard® technology, HEMPADUR AvantGuard® activated zinc primers are developed for a range of industries and applications, from offshore oil & gas platforms to wind turbines.  

AvantGuard® is the result of an extensive R&D programme run specifically to solve an issue discovered in Hempel’s labs in 2007: only one-third of the zinc in a zinc epoxy primer is utilised for galvanic protection.

Pernille Lind Olsen, Group Protective Product Director at Hempel, comments: “AvantGuard® is perhaps the biggest change in anti-corrosive technology since zinc coatings were first introduced during the 1960s. The technology gives customers strong anti-corrosion performance in a coating that has high mechanical strength.”

AvantGuard® uses hollow glass spheres and a proprietary activator to activate more zinc in the coating, ensuring a significantly higher galvanic effect than zinc primers without the AvantGuard® technology. The technology also enables barrier and inhibitor protection, and so combines three protective effects in one. 

Furthermore, the unique formulation improves the coating’s mechanical strength, which is essential for applications with, for example, extreme temperature and humidity fluctuations.

applications with, for example, extreme temperature and humidity fluctuations. “In a standard zinc epoxy protective system, the zinc primer is the weakest mechanical point and, as a result, cracks can form in the coating as the steel expands and contracts under extreme conditions,” says Josep Palasi, Hempel R&D Director. “AvantGuard® zinc coatings are different as the glass spheres and sub-products that result from the unique zinc activation process stop micro-cracks as soon as they form. This, we can say, makes the coating self-healing.”

Proven to Increase Protection

The increased protection and durability has been proven in extensive Hempel tests, including salt spray tests (ISO 12944 part 6), cyclic corrosion tests (ISO 20340 - NORSOK M-501 revision 6) and thermal cycling resistance tests (NACE cracking test and Hempel’s welding test).

HEMPADUR AvantGuard® primers can be applied using the same application techniques as standard zinc epoxies.

In our tests, HEMPADUR AvantGuard® shows a high tolerance to different application conditions, such as high temperatures and humidity, and we even see high crack resistance when the coating is applied with an excessive dry film thickness,” Pernille Lind Olsen says.

The HEMPADUR AvantGuard® series currently includes three different zinc primers and was released worldwide on the 23rd September 2014.

HEMPADUR AvantGuard coatings at a glance:

• Advanced corrosion protection due to the high level of activated zinc in the coating
•  Excellent crack resistance in cyclic temperatures and varying humidity
•  Self-healing of micro-cracks prevents further propagation of cracks
•   Requires same application techniques as zinc epoxies
•  Suitable for all applications and especially designed for tough conditions and C4 and C5 environments
• Three coatings currently available: HEMPADUR AvantGuard® 770, HEMPADUR AvantGuard® 750 and HEMPADUR AvantGuard® 550  

For more information contact: Hempel:  www.hempel.com